HOW TO USE

Follow These 8 Easy Steps

Before Tanning it is a good idea to exfoliate your skin in the shower. This will help remove any dead skin and allow a smooth and even tan.

After exfoliating make sure that your skin is completely clean and DRY! If need be make sure all shaving is done before the tanning process.

Before applying the tanning solution make sure your hair is out of the way and all jewelry is removed.

While applying the tanning solution hold the can or airbrush about 8 inches away from the body. Use circular motions to insure an even coat. We suggest starting on the inside of the arm to get used to the flow of the spray and to make any adjustments.

If there is a build up of tanning solution in an area or on hair just blot with a paper towel and reapply.

When applying to the face area make sure that eyes and mouth are shut. When applying around eyes do not squint eyes close them in a relaxed manner. When apply on hands and feet only apply a light coat to the TOP of your hands and feet!If you get any tanning solution on the bottom of your hands or feet just wash off with soapy water. Also knees and elbows need a very light coat.

When finished, let dry for about five minutes, you can use a fan or hair dryer (set on cool air) to speed up the drying process. Allow four to six hours before taking your next shower or bath. The longer the tanning solution is on the body, the darker your tan will become. While the tanning solution is on your body avoid any strenuous activites, heavy sweating may weaken your tan.

If you get any of the tanning solution on your clothing, simply wash in your regular washing cycle.